Halo Alpha
Register
Advertisement
Halo Alpha
35#.png35#.png


This article does not have enough inline citations or proper citation format. You can help Halo Alpha by adding citations.
Semi-Powered Infiltration

A concept illustration of SPI armor from The Art of Halo 3.

Semi-Powered Infiltration (SPI) armor was an experimental armor system used by the United Nations Space Command. It was developed for use by the SPARTAN-IIIs.

Design[]

Though more advanced than the Orbital Drop Shock Troopers' body armor, it is far less advanced and less durable than the Mjolnir Powered Assault Armor used by the SPARTAN-IIs. Its main benefit is that it is drastically cheaper to produce than the Mjolnir Armor. Realizing that the UNSC could not produce sufficient armor in time for its larger SPARTAN-III forces, the SPI armor was designed with an emphasis on being mass produced and being stealthy rather than on raw strength and power. However, this sacrifice also was a huge hindrance as its lack of durability and offensive capacities resulted in the near wipe out of SPARTAN-IIIs on missions. It features special photo-reactive panels that mimic the surrounding textures, effectively being the UNSC equivalent to the Covenant's Active camouflage systems. It has been described as "part legionnaire mail, part tactical body armor, and part chameleon" by both Tom-B292 and Dr. Catherine Halsey.[1]

Advantages[]

  • The armor is significantly cheaper and easier to mass-produce than Mjolnir Armor.
  • The system includes photo-reactive panels that act as an Active camouflage for the wearer.
  • The armor is easier to transport, because it is not as bulky or as heavy as the Mjolnir Armor.
  • The armor has an efficient cooling system and is significantly difficult to detect even with thermal scanners.
  • The faceplate has an automatic 5x zoom ability.[2]

Disadvantages[]

  • It had no energy shielding system, unlike the SPARTAN-IIs' MJOLNIR Mark V and Mark VI models, making the user far more vulnerable to enemy fire and a major contributor to the high fatality rate of the SPARTAN-III's. The exception to this limitation could be found in the SPARTAN-III Headhunters: their experimental armor was known to be equipped with energy shields, due to their elite nature and value. However, power must be drawn from the energy shields to recharge the suit's Active camouflage module.
  • It does not grant the SPARTAN-IIIs enhanced strength, speed or agility, unlike MJOLNIR.
  • Since the photo-reactive plates take time to recover after explosions such as a flashbang grenade and plasma hits, the SPARTAN-III is visible until the plates recover. With the exception of the Headhunters' suits, the SPI armor does not feature true Active camouflage systems.
  • It is made of a less durable, less dense alloy than Mjolnir Armor: Kelly-087 dented Holly-G003's chest plate with her fist when first encountering the SPARTAN-IIIs.
  • The SPI armor has an air supply that will last only seven minutes, while the MJOLNIR has an air supply which can sustain a wearer for ninety minutes.
  • The SPI armor cannot be used for long periods of time without the cooling system failing.
  • It lacks the ability to support an onboard Artificial intelligence construct, unlike the Mark V, Mark VI, and all further MJOLNIR generations.

Versions[]

Mark I[]

The SPI Armor Mark I was used by the SPARTAN-IIIs of Alpha Company. It featured hardened plates and photo-reactive panels. Though advanced compared to standard UNSC infantry armor, it could only take a few glancing blows before failing.[3] It featured full body armor with an enclosed helmet and heads-up display, and a supply of oxygen; though only enough for seven minutes, compared to the Mjolnir Armor’s oxygen supply of ninety minutes. It was also equipped with a cushioning layer of liquid nanocrystals that provided more ballistic protection than three centimeters of Kevlar diamond weave, without the bulk. The featured photo-reactive panels gave the SPARTANs of Alpha Company a rough equivalent to Active camouflage. The camouflage patterns, however, shifted irregularly and imperfectly, which made the photo-reactive panels inferior compared to the Covenant's Active camouflage technologies.

Mark II[]

The SPI Armor Mark II was a more advanced version of the SPI Mark I, first used by the drill instructors of Beta Company, and then by the SPARTANs of Beta Company. They had new photo-reactive coating to boost their camouflaging properties. There were also numerous experimental refits to the ballistic gel layers, upgraded software suites, and other functions. Although the new photo-reactive coating could mimic a wide range of electromagnetic radiation, it was still sensitive to overload, so the wearer would still be vulnerable for several seconds after a flashbang or plasma hit while the panels reset.[4]

It was proposed in 2537 for Alpha Company, but the request was denied because the armor was over budget. After Alpha Company's pyrrhic victory in Operation: PROMETHEUS, the Mark II SPI armor was approved for mass production. At the time of Gamma Company's augmentation, system adjustments (upgrades including improved ballistics gel inner layer, updated software suites and new photo-reactive panels) were being beta tested, and were scheduled to be installed within a year of the augmentation procedure.

MIRAGE Exoskeleton[]

Considered a direct evolution of the Semi-Powered Infiltration Armor[5]. The MIRAGE Exoskeleton is a fully powered version of SPI Armor, that is weaker than MJOLNIR Powered Assault Armor but meets all performance standards for a far lower price[6]. The MIRAGE Exoskeleton incorporates the latest in deception jammers[7] and features a lightweight design[8]. The MIRAGE Exoskeleton is fully compatible with MJOLNIR Powered Assault Armor/Mark VI[9].

Trivia[]

  • Some screenshots released by Bungie led to fans speculating that they would be able to use SPI armor in Halo 3. However, the armor was later revealed to be a MJOLNIR EVA variant.
  • The UNSC Air Force Pilot helmet, the MJOLNIR EVA variant helmet, the Orbital helmet, and the helmet worn by Marine Hellbringers all bear noticeable resemblance to the SPI helmet.
  • Kurt-051 is the only SPARTAN-II who has worn SPI Armor.
  • Its possible to recreate the SPI armor in Reach. Players would need pilot helmet with gold visor, either ODST shoulders or UA/base security, FJ/PARA kneeguards and the Default chest piece or the UA/Base Security chest piece.
  • It is unknown how SPI armor can have a breathable atmosphere when it is not airtight or waterproof, so perhaps the user has some sort of rebreather.

Gallery[]

Appearances[]

Sources[]

  1. Halo: Ghosts of Onyx, Page 16
  2. Halo: Ghosts of Onyx, Page 19
  3. Halo: Ghosts of Onyx, Page 14
  4. Halo: Ghosts of Onyx, Page 113
  5. Halo: The Master Chief Collection: Halo 3 Appearance - Helmet - MIRAGE
  6. Halo: The Master Chief Collection: Halo 3 Appearance - Legs - MIRAGE
  7. Halo: The Master Chief Collection: Halo 3 Appearance - Chest - MIRAGE
  8. Halo: The Master Chief Collection: Halo 3 Appearance - Left & Right Shoulder - MIRAGE
  9. Halo: The Master Chief Collection: Halo 3 Appearance


Advertisement